Initial Configuration New OLT - Vsol GPON

Note

The following steps are for a new Vsol OLT or one that has been reset to its factory values.

To have a clearer understanding of how the OLT connection is structured when configuring, you can refer to the following diagram on how to make the physical connection.

Steps to Configure New OLT

Access Info

User: admin
Password: Xpon@Olt9417#

1 We must verify that we have internet access.

2 We must have our Vlan, Administration LAN, and Customer Segment LAN added. For more information, you can read the manual Configuration in RouterBoard MikroTik for OLT Vsol GPON

3 We must test the connection with the OLT using the default IP assigned.

4 Connect our computer to the router network and ping from our terminal.

5 Enter the OLT IP in a browser.

6 Configure the new IP for the OLT.

We must re-enter but with the new IP.

7 Create a user in the OLT, which will be used to connect to AdminOLT.

8 Enable the Telnet service.

Next Step

Now you can add it to AdminOLT, you can follow the manual steps Add OLT Vsol GPON

April 12, 2024, 3:32 p.m. - Visitas: 23250