Authorize ONU Fiberhome
Important
Take into account that the PON port of the OLT must have the No Auth modes disabled. If you have any doubts about this issue, you can consult the following manual; Configure PON Port OLT Fiberhome
When connecting a device to the OLT, it must be authorized to establish a connection, the following steps explain how to authorize ONUs on Fiberhome OLTs from AdminOLT.
1To see the devices that have not yet been authorized, we need to go to the ONU > Unauthorize section and select an available ONU.
2Fill out the following form where we can assign a VLAN, set the upload and download speed, among other options to the ONU.
ONU Model
Make sure your ONUs are being authorized with models already added to your OLT, you can find out by logging into your OLT. For example:
For FiberHome ONUs, we recommend having the 5506-02-F model added in AdminOLT.
If you have any doubts about how to create these models in the AdminOLT system, you can go to the following link
NOTE
We can also add additional information about the ONU, such as the address, phone number and location.
Information about WAN IP
To create a WAN IP when authorizing, it is recommended to read the following manual that discusses the topic in more depth; Configure WAN IP Fiberhome
3Verify that the ONU has been authorized correctly.
4If you want to verify the details of the authorized ONU, check the details with the following button.
The information displayed will be:
ONU Status
ONU Information and Details
April 12, 2024, 3:32 p.m. - Visitas: 3568