Authorize ONU Vsol EPON
Important
Take into account that the PON port of the OLT must have the AutoLearn mode disabled. If you have any doubts about this, you can consult the following manual; Configure PON Port
When connecting a device to the OLT, it must be authorized to establish a connection, below are the steps to authorize ONUs in VSOL GPON OLTs from AdminOLT.
Video Tutorial
1To view the devices that have not yet been authorized, we must go to the ONU > Unauthorized section and select an available ONU.
2Complete the following form, the following is only informative for the system since in the OLT V-VSOL EPON, VLANS, Speed Plans (will be integrated in future updates), and Service Profile are not configured.
NOTE
Similarly, we can add additional information about the ONU, such as address, phone, and location.
Information about WAN IP
At the moment, we cannot create the WAN from Authorize ONU since we have to wait for the OLT to configure the ONU correctly. To create a WAN IP at the time of authorization, it is recommended to read the following manual that talks more in-depth about the topic; Configure WAN IP VSOL EPON
3Verify that the ONU has been authorized correctly.
Waiting Time
When authorizing an ONU, we must wait a few minutes for the OLT to be able to provide service.
4If you wish to verify the data of the authorized ONU, check the details with the following button.
Information and Details of the ONU
April 12, 2024, 3:32 p.m. - Visitas: 9029