How to Import ONU's C-Data into AdminOLT

Important

Please note that the PON port of the OLT must have the Auto and Adaptive modes disabled. If you have any doubts about this issue, you can consult the following guide; Configure PON Port

If your OLT is already in operation, meaning if it already has authorized equipment, you can upload this equipment to the system through the Import ONU's to the System function, which is located in the Tools box in the OLT menu, where you will find the list of OLTs that have been connected.

1In the OLT List, select the equipment you will be working with and then go to Import ONU's to the System, which is located on the button labeled Tools.

2A list of the equipment already authorized in your OLT will be displayed, so you need to select the equipment you want to import. To select the equipment, you can do it in batches, meaning selecting several at once or one by one.

3Once you have selected the equipment, import the ONU's to the AdminOLT system

4Confirm the process.

5Verify that the ONU's have been imported correctly.

NOTE

It is recommended to always validate the information and details of the equipment once they have been imported into the system.

April 12, 2024, 3:32 p.m. - Visitas: 3901