Enable Vsol Single PON UPlink port

1In the OLT List, select the equipment with which we will work and then go to Uplink Ports, which is located in the button with the label Tools.

2In the Uplink Ports List, select the port with which we will work and then go to Assign/Remove VLAN, which is located in the button with the label Tools.

3Assign the VLAN that is convenient to establish the connection.

NOTE

You can write a description and choose between assign or remove the VLAN

4Verify that the changes have been applied correctly.

April 12, 2024, 3:32 p.m. - Visitas: 2996