First Steps
Scenario 1: I have a functioning OLT with clients and I authorize my onus with the Auto Auth method.
If your OLT is already functioning follow these steps.
OLT Vsol operating flow in Autolearn mode with AdminOLT.
1 Add OLT in AdminOLT. View manual Here
- 1.1.- Paste Connection Script (optional) for remote access. View manual Here
2 Apply initial configuration. View Manual Here.
3 Import ONU'S from the OLT. View Manual Here.
4 View Authorized ONU. View Manual Here.
Scenario 2: I have a functioning OLT with clients and I authorize my onus with the MAC Auth method.
1 Add OLT in AdminOLT. View manual Here
- 1.1.- Paste Connection Script (optional) for remote access. View manual Here
2 Apply initial configuration. View Manual Here.
3 Authorize ONU. View Manual Here.
4 View Authorized ONU. View Manual Here.
5 Import ONU'S from the OLT. View Manual Here.
Scenario 3: My OLT is new and I want to connect it to AdminOLT.
Configuration on MikroTik RouterBoard for Vsol OLT
1 Access the OLT and create accesses. View Manual Here.
2 Add OLT in AdminOLT. View manual Here.
3 Connection script for remote access. View Manual Here.
4 Apply initial configuration in AdminOLT. View Manual Here.
5 Configure PON Port. View Manual Here.
6 Create VLAN in the OLT. View Manual Here.
7 Assign VLAN to UPLINK port. View Manual Here.
8 Authorize ONU. View Manual Here.
9 View Authorized ONU. View Manual Here.
10 Configure WAN. View Manual Here.
April 12, 2024, 3:32 p.m. - Visitas: 9072