First Steps
Scenario 1: I have a functioning OLT with clients and I authorize my ONU's using the AutoLearn method.
If your OLT is already functioning, follow these steps.
Operating flow of OLT VSOL Single PON in AutoLearn mode with AdminOLT.
1Add OLT in AdminOLT. See manual here
- 1.1Paste connection script (optional) for remote access. See manual here
2Apply initial configuration. See manual here
3Import ONU's from the OLT. See manual here
4View Authorized ONU. See manual here
Scenario 2: I have a functioning OLT with clients and I authorize my ONU's using the Manual method.
1Add OLT in AdminOLT. See manual here
- 1.1Paste connection script (optional) for remote access. See manual here
2Apply initial configuration. See manual here
3Authorize ONU. See manual here
4View Authorized ONU. See manual here
5Import ONU's from the OLT. See manual here
Scenario 3: My OLT is new and I want to connect it to AdminOLT.
Configuration on RouterBoard MikroTik for OLT VSOL Single PON
1 Access the OLT and create accesses. See manual here
2 Add OLT in AdminOLT. See manual here
3 Connection script for remote access. See manual here
4 Apply initial configuration in AdminOLT. See manual here
5 Configure PON Port. See manual here
6 Create VLAN in the OLT. See manual here
7 Assign VLAN to UPLINK port. See manual here
8 Authorize ONU. See manual here
9 View authorized ONU. See manual here
10 Configure WAN. See manual here
April 12, 2024, 3:32 p.m. - Visitas: 3452