Port Forwarding OLT Fiberhome
1 In order to establish the connection successfully, we need to generate a script. To do this, go to our OLT and select the "Edit" option.
Once in the editing section, go to the "Connection Script" tab.
2 Here we will enter our private IP and select the Generate Script option. We will then see that a Script is provided to us.
Private IP OLT
You must enter the private IP of the OLT, for this example, the RB must be able to ping the OLT.
3 This should be entered in our mikrotik router via Winbox.
4 After copying the script, we must return to the "Details" tab and select the "Save and check connection" option.
You will see a loading screen where you can check the status of connections such as SSH, PON port, etc.
Upon completion, you will be able to see the status of the different established connections.
Note
When verifying the connection, the SNMP service may take up to 10 minutes to communicate with AdminOLT. If this is the case, please verify the connection after that time.
Note
Next step is to apply initial configurations Apply Initial Configuration OLT Fiberhome
April 12, 2024, 3:32 p.m. - Visitas: 3698